Less Effort,
Higher Throughput

Streamline and automate the workflow for high-volume dental production with our large-format post-processing solutions.

High-Volume Capacity

High-Volume Capacity

Certified for Biocompatible Applications

Certified for Biocompatible Applications

Compatible With All Formlabs Resin Printers

Compatible With All Formlabs Resin Printers

SLA 3D Printing Workflow

Increase throughput with our automated, large-format post-processing machines. All SLA 3D printed parts require washing to remove residual resin and most benefit from post-curing to achieve peak dimensional accuracy. Materials for intraoral use require post-curing to meet biocompatibility requirements.



Print your parts on a Form 3BL or Form 3B 3D printer.


Insert one Form 3BL Build Platform or two Form 3B Build Platforms directly into Form Wash L after printing for a consistent, automatic rinse.


Transfer the parts to the Form Cure L to maximize material properties, ensure dimensional accuracy, and achieve biocompatibility where applicable.


Parts are ready to be used intraorally or to produce various indications.

Form Wash L

Form Wash L agitates solvent to remove residual resin from SLA 3D printed parts, leaving you with a smooth, clean, high-quality part every time. Once washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints.

Set It And Forget It

Use the pre-programmed wash settings or save your own frequently used custom profiles to improve post-processing efficiency.

Form Wash L - Informed Maintenance

Informed Maintenance

The embedded solvent monitor and cycle counter help you maintain peak cleaning performance by notifying you when it’s time to replace the solvent.

Form Wash L - One Size Fits All

One Size Fits All

Seamlessly integrate Form Wash L into your dental production workflow. Wash one Form 3BL Build Platform or two Form 3B Build Platforms with the included build platform adaptor.

While you’re away, parts are precisely agitated in IPA, getting every nook and cranny perfectly clean.

Form Cure L

Form Cure L uses heat, UV light, and consistent universal exposure to bring parts to their peak dimensional accuracy and meet biocompatibility requirements where applicable.

Optimized for Formlabs Materials

Use the pre-programmed cure settings or save your own frequently used custom profiles to improve post-processing efficiency.

Form Cure L - Rapid, High-Intensity Curing

Rapid, High-Intensity Curing

Two 500W heaters bring temperatures up to 80°C in less than 10 minutes while three UV light modules emit the optimal wavelength of light for fast, effective curing.

Dual 500W

Consistent Universal Exposure

A reflective inner cavity and rotating glass turntable ensure UV light reaches all surfaces of the part for a consistent cure.

Once the chamber is heated, 3 LED modules trigger the post-curing reaction, bringing parts to their maximum mechanical properties.

Validated For Biocompatible Applications

Form Wash L and Form Cure L have been validated in FDA-cleared workflows and are compatible with biocompatible, sterilizable materials made in our ISO 13485 facility.

Wash L and Cure L - Validated For Biocompatible Applications
Wash L and Cure L - A Complete Ecosystem for Large Part Fabrication

A Complete Ecosystem for High-Volume Dental Production

Maximize productivity and produce parts you’ll be proud to deliver with the Form 3BL ecosystem. From setting up your print to post-processing your part, our suite of products streamline the dental production workflow.

Form Wash L and Form Cure L

Save time, minimize effort, and maximize efficiency with our automated, large format post-processing machines.

Form Wash L and Form Cure L