A Complete Ecosystem For High Volume Dental Production
With today’s launch of Form Wash L and Form Cure L, our automated large-format post-processing machines, Formlabs is excited to bring to market a complete ecosystem for high-volume dental production. From setting up your print to post-processing your part, our suite of products streamline the 3D printing workflow to produce high-quality dental parts around the clock with minimal intervention.
With our new automated large-format post-processing machines and a wide range of dental materials, the Form 3BL ecosystem raises the bar for dependable high-volume dental production.
Announcing the Form Wash L and Form Cure L: Form 3L Ecosystem Demo
Want to learn more about the Form 3L and Form 3BL ecosystem, and the new large format post-processing machines?
In this demo, Kyle and Chris will expain how to navigate the Form 3L end-to-end workflow, including post-processing.
A Large-Format 3D Printer For Batch Production Of Dental Parts
The Form 3BL is at the center of the large-format ecosystem. It boasts an enormous build volume—33.5 × 20 × 30 cm (13.2 × 7.9 × 11.8 in)—enabling you to print up to 120 models in a day, with just a few printer interactions. Rich with features such as a state-of-the-art Light Processing Unit, remote printing, and automatic resin dispensing, the Form 3BL is simple to use and highly efficient.
Automated Post-Processing for Large-Scale SLA 3D Prints
All SLA 3D printed parts require washing to remove residual resin and most benefit from post-curing to achieve maximum material properties. Automated washing and post-curing are also critical requirements in many material’s Instructions For Use for producing biocompatible end-use parts.
Similar to our automated desktop post-processing solutions, Form Wash L and Form Cure L are large-format post-processing solutions that streamline and automate this workflow and consistently produce high-quality parts.
Smooth, Clean, High-Quality Parts Every Time
Form Wash L agitates solvent to remove residual resin from printed parts, leaving you with smooth, clean, high-quality parts every time.
Form Wash L is optimized for all Formlabs SLA materials and has pre-programmed recommended wash settings for each material to minimize time with the machine. Already producing dental parts at scale with the Form 3B? Form Wash L supports one Form 3L build platform or two Form 3 build platforms with the included build platform adapter, allowing you to seamlessly integrate into any Formlabs SLA workflow.
Rapid, High-Intensity Curing For Peak Performance
Form Cure L brings parts to their peak dimensional accuracy and properties using heat, UV light, and consistent universal exposure.
Form Cure L contains a reflective inner cavity and rotating glass turntable to ensure UV light reaches all surfaces of your part for a consistent cure, while two 500W heaters bring temperatures up to 80°C in less than 15 minutes for fast, effective curing.
Similar to Form Wash L, Form Cure L also has pre-programmed cure settings for each material to maximize efficiency.
A Complete Ecosystem for High-Volume Dental Production
The Form 3BL ecosystem raises the bar for dependable high-volume dental production. Our suite of products work around the clock with minimal intervention. Alongside our automated post-processing machines and wide range of dental materials, the Form 3BL ecosystem is the ideal 3D printing solution for cost-effective, efficient, dental production.