Permanent Crown Starter Pack
including 20% VAT
Our library of Dental Resins enables dental practices and labs to rapidly manufacture a range of dental products in-house, from biocompatible surgical guides and splints to fixed prosthetic and clear aligner models.
Permanent Crown Resin is a tooth-colored, ceramic-filled resin for 3D printing of permanent single crowns, inlays, onlays, and veneers. Permanent Crown Resin produces high strength, long term restorations with an accurate and precise fit. Low water absorption and a smooth finish ensure restorations made from Permanent Crown Resin have a low tendency to age, discolor, or accumulate plaque.
Available in four VITA* shades (A2, A3, B1, C2).
A Stainless Steel Build Platform is required when printing with Permanent Crown Resin for optimal aesthetics and performance.
Permanent Crown Resin:
Supports print resolutions: 50 microns
*VITA is a registered trademark of a company not affiliated with Formlabs Inc
Download our Application Guide to learn the complete digital workflow and best practices for making 3D printed permanent restorations on the Form 3B.
- Pick a Shade
- Stainless Steel Build Platform
Why Choose Permanent Crown Resin?
Low water absorption and a smooth finish ensure restorations made from Permanent Crown Resin have a low tendency to age, discolor, or accumulate plaque.
Produce a rigorously strong and precise permanent restoration with a validated workflow that ensures consistent production.
Leverage a tooth-colored, ceramic-filled resin to create confident patient smiles.
With an accessible price point and low cost per part, high-quality restorations are within reach for dental businesses of all sizes.
Provide the patient and clinician the peace of mind they deserve.
Permanent Crown Resin produces high strength, long term restorations with an accurate and precise fit. This starter pack includes the required Stainless Steel Build Platform as well as the a cartridge of Permanent Crown Resin to get you printing right away.
Consider Permanent Crown Resin for:
Permanent Crown Resin
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Test samples were printed with a Stainless Steel Build Platform on a Form 3B printer with 50 μm Permanent Crown Resin settings. The printed samples were post-processed as recommended in the Instructions for Use. Screen reader support enabled
Form Wash Settings
3 min in IPA
To ensure that finished parts are biocompatible, follow all part washing notes in the Instructions for Use. Maintain separate wash buckets for biocompatible materials. Do not leave Permanent Crown Resin in IPA for longer than 3 minutes total, as excessive solvent exposure affects the quality of the final part. Use an IPA-filled squeeze bottle to remove any remaining resin on the printed parts and in between supports and rafts. An IPA-soaked brush may help with resin removal.
Form Cure Settings
20 + 20 min
Post-curing as recommended in the material-specific Instructions for Use is required to ensure optimal performance and biocompatibility of 3D printed dental appliances. This resin requires two post-curing cycles. Remove supports and sandblast between post-curing cycles.