Factory Reconditioned Form 3BL Package

Low Force Stereolithography (LFS)™ 3D printing uses linear illumination and a flexible film tank to turn liquid resin into flawless parts. A key component of the LFS process, the strong dual-layer film at the bottom of the Form 3L Resin Tank allows for a dynamic and precise print process, scaled up for large format printing.

Form 3L Resin Tank V3 offers an improved print success rate in some cases compared to the previous version of the Form 3L Resin Tank V2.

Resin Pumping System is an accessory for Form 3 Series stereolithography (SLA) 3D printers that seamlessly delivers 5 L of resin through a pumping system directly to the printer’s resin tank. Reduce waste by 86%, improve efficiency with less frequent cartridge changes, and unlock bulk pricing on Formlabs SLA resins.

Form Cure L V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure large Form 4L/BL prints in as little as 60 seconds, with 5x more UV power, faster heat-up times, and a 26% reduction in overall footprint from the previous generation while curing up to 19% larger parts. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.

Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.

Form Cure L V2 precisely combines heat and 405 nm light to deliver tough, strong prints with unprecedented speed and consistency. Now you can post-cure large Form 4L/BL prints in as little as 60 seconds, with 5x more UV power, faster heat-up times, and a 26% reduction in overall footprint from the previous generation while curing up to 19% larger parts. To begin curing, just select a validated preset for Formlabs 45+ materials. Advanced users can customize time and temperature to fit their specific needs.

Post-curing completes the chemical reaction started during printing, enhancing final part strength, toughness, heat resistance, and creep resistance while creating a harder, less tacky surface. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies.

Solvent Pump is a battery-powered pump that quickly fills and empties a wash bucket for Form Wash. Solvent Pump eliminates the risk of chemical spills and simplifies your workflow.

Bring SLA parts to the next level with Formlabs Finishing Tools: a curated set of post-processing solutions for SLA 3D printing that streamlines every step in the workflow from part and support removal to sanding, buffing, and polishing.

Curated by experienced engineers and validated by customers, these 3D printing finishing tools were designed to enhance surface finish, smooth planes and edges, and elevate overall appearance while driving down labor time and cost per part.

What’s Included:

• Pen Sander, Rotary tool, Bit kit, working mat, hobby knives and other accessories

Produce high-quality and affordable parts more efficiently and effortlessly than ever with Form Auto, an automated hardware extension for Form 3/3+ and Form 3B/3B+ that enables 24/7 3D printing with no printer downtime.

Form Auto automatically removes finished parts from Build Platform 2 and starts the next print without the need for operator interaction.

Form Auto is simple to set up with existing and new printers. Use Form Auto for low-mid volume production, and shared printer installations.

Formlabs Resin Washing Solution is a non-flammable solution for cleaning resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve nearly twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace.

Formlabs Resin Washing Solution is recommended with Form Wash and Form Wash L.

Grey Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.

Grey Resin V4.1 is compatible with Form 3 Series printers. Grey Resin V4.1 produces tougher parts compared to Grey Resin V4.

Choose Grey Resin V5 on the Form 4 Series for three times faster print speed and improved mechanical properties.

White Resin is perfect for general-purpose prototyping and design, and models with intricate details. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Its neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.

White Resin V4.1 is compatible with Form 3 Series printers. White Resin V4.1 produces brighter white parts compared to White Resin V4.

Choose White Resin V5 on the Form 4 Series for three times faster print speed and improved mechanical properties.

Clear Resin is a rigid material that polishes to near optical transparency. It is ideal for working with light or showcasing internal features, printing see-through models and devices. Use Clear Resin to create clear prototype parts, LED housings, windows, fluidics, molds, optics, lighting, and any parts requiring translucency.

Clear Resin V4.1 is compatible with Form 3 Series printers. Clear Resin V4.1 creates more color-neutral and transparent parts compared to Clear Resin V4.

Choose Clear Resin V5 on the Form 4 Series for three times faster print speed and improved mechanical properties.