Permanent Crown Resin (Form 3) 1 kg (0.7 L)
RS-F2-PC-PKG
Available in four VITA shades (A2, A3, B1, C2).
Read our Application Guide to learn the complete digital workflow and best practices for making 3D printed permanent restorations on your Formlabs 3D printer.
- Pick a Shade
Why Choose Permanent Crown Resin?
Low water absorption and a smooth finish ensure restorations made from Permanent Crown Resin have a low tendency to age, discolor, or accumulate plaque.
High Strength
Produce a rigorously strong and precise permanent restoration with a validated workflow that ensures consistent production.
Aesthetic
Leverage a tooth-colored, ceramic-filled resin to create confident patient smiles.
Affordable
With an accessible price point and low cost per part, high-quality restorations are within reach for dental businesses of all sizes.
Biocompatibility
Provide the patient and clinician the peace of mind they deserve.
Applications
Permanent Crown Resin produces high strength, long term restorations with an accurate and precise fit.
Consider Permanent Crown Resin for:
Material Properties*
Permanent Crown Resin
Density
Viscosity
Flexural Modulus
Water Solubility
Water Sorption
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Test samples were printed with a Stainless Steel Build Platform on a Form 3B printer with 50 μm Permanent Crown Resin settings. The printed samples were post-processed as recommended in the Instructions for Use. Screen reader support enabled
Post-Processing
Form Wash Settings
3 min in IPA
To ensure that finished parts are biocompatible, follow all part washing notes in the Instructions for Use. Maintain separate wash buckets for biocompatible materials. Do not leave Permanent Crown Resin in IPA for longer than 3 minutes total, as excessive solvent exposure affects the quality of the final part. Use an IPA-filled squeeze bottle to remove any remaining resin on the printed parts and in between supports and rafts. An IPA-soaked brush may help with resin removal.
Form Cure Settings
20 + 20 min
60 °C
Post-curing as recommended in the material-specific Instructions for Use is required to ensure optimal performance and biocompatibility of 3D printed dental appliances. This resin requires two post-curing cycles. Remove supports and sandblast between post-curing cycles.
