Temporary CB Resin Starter Pack


Lead time: 21 days

including 20% VAT

Pick A Shade

Our library of Dental Resins enables dental practices and labs to rapidly manufacture a range of dental products in-house, from biocompatible surgical guides and splints to fixed prosthetic and clear aligner models.

The Temporary CB Resin Starter Pack contains a 1kg (0.7L) cartridge of Temporary CB Resin and a Stainless Steel Build Platform, required for printing with Temporary CB Resin. 

Temporary CB Resin is a tooth-colored resin for 3D printing of temporary crown and bridge restorations, inlays, onlays, and veneers. Indicated for up to seven-unit bridges and available in five shades, this material provides excellent marginal adaptation, strength, and aesthetics. 

Use traditional temporary cements to fix restorations produced with Temporary CB Resin. Restorations made with Temporary CB Resin may remain up to 12 months in the mouth. Digitally created restorations enable a quick, collaborative process between dentist, technician, and patient.

A Stainless Steel Build Platform is required when printing with Temporary CB Resin for optimal aesthetics and performance. This build platform is compatible with the Form 3B/+ and Form 2. This build platform is not validated for use with other materials.

Download our Application Guide to learn the complete workflow and best practices for making 3D printed temporary restorations.

Temporary CB Resin:

Available for Form 3B/+, Form 2. Not compatible with Form 3.

Supports print resolutions: 50 microns

Post-curing required.

Compatible with any Form 3/3B Resin Tank

Requires Resin Tank LT for Form 2.

Requires Stainless Steel Build Platform.

Download our Application Guide to learn the complete digital workflow and best practices for making 3D printed permanent restorations on the Form 3B/+.

  • Pick A Shade
  • Stainless Steel Build Platform
Temporary CB Resin models, onlays and inlays

Why Choose Temporary CB Resin?

Temporary CB Resin is a highly filled material that's validated for comfortable, aesthetic, and temporary restorations.


Provide tooth-colored prosthetics, available in four VITA shades.


Enable a quick, collaborative process between dentist, technician and patient with digitally created restorations.

Precise Fit

Enhance patient comfort with precisely fit temporaries with excellent marginal adaptation, strength, and aesthetics.

Temporary Biocompatibility

Restorations may remain in the mouth for up to 12 months.


Temporary CB Resin is used to produce precisely fitting temporaries with a smooth surface finish, high resolution, and dimensional stability. This starter pack includes the required Stainless Steel Build Platform as well as the a cartridge of Temporary CB Resin to get you printing right away.

Consider Temporary CB Resin for:

Bridges (up to 7 units)

Material Properties*

Temporary CB Resin


1.4 - 1.5 g/cm^3


2500 - 6000 MPa*s

Flexural Strength

≥ 100 MPa

* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Test samples were printed with a Stainless Steel Build Platform on a Form 2 and Form 3B printer with 50 μm Temporary CB Resin settings. The printed samples were post-processed as recommended in the Instructions for Use. Data for post-cured samples were measured on 3 point bending test specimens according to EN ISO 10477 and EN ISO 4049 standards. Screen reader support enabled.


Form Wash Settings


3 min in IPA


To ensure that finished parts are biocompatible, follow all part washing notes in the Instructions for Use. Maintain separate wash buckets for biocompatible materials. Do not leave Temporary CB Resin in IPA for longer than 3 minutes, as excessive solvent exposure affects the quality of the final part. Use an IPA-filled squeeze bottle to remove any remaining resin on the printed parts and in between supports and rafts. An IPA-soaked brush may help with uncured resin removal.

Form Cure Settings


20 + 20 min


60 °C


Post-curing as recommended in the material-specific Instructions for Use is required to ensure optimal performance and biocompatibility of 3D printed dental appliances. This resin requires two post-curing cycles. Remove supports and sandblast between post-curing cycles.