Permanent Crown Resin (Form 3) 1 kg (0.7 L)

RS-F2-PC-PKG

Shipping time: Est. Nov 28 - Dec 2

Pick a Shade

Permanent Crown Resin is a tooth-colored, ceramic-filled resin for 3D printing of permanent single crowns, inlays, onlays, and veneers. Permanent Crown Resin produces high strength, long term restorations with an accurate and precise fit. Low water absorption and a smooth finish ensure restorations made from Permanent Crown Resin have a low tendency to age, discolor, or accumulate plaque.

Available in four VITA shades (A2, A3, B1, C2).

Read our Application Guide to learn the complete digital workflow and best practices for making 3D printed permanent restorations on your Formlabs 3D printer.
  • Pick a Shade
Individual tooth colored permanent crowns

Why Choose Permanent Crown Resin?

Low water absorption and a smooth finish ensure restorations made from Permanent Crown Resin have a low tendency to age, discolor, or accumulate plaque.


High Strength

Produce a rigorously strong and precise permanent restoration with a validated workflow that ensures consistent production.


Aesthetic

Leverage a tooth-colored, ceramic-filled resin to create confident patient smiles.


Affordable

With an accessible price point and low cost per part, high-quality restorations are within reach for dental businesses of all sizes.


Biocompatibility

Provide the patient and clinician the peace of mind they deserve.

Applications

Permanent Crown Resin produces high strength, long term restorations with an accurate and precise fit. 


Consider Permanent Crown Resin for:

Inlays
Veneers
Crowns
Onlays

Material Properties*

Permanent Crown Resin

Density

1.4 - 1.5 g/cm^3

Viscosity

2500 - 6000 MPa*s

Flexural Modulus

4090 MPa

Water Solubility

0.23 μg/mm^3

Water Sorption

3.6 μg/mm^3

* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Test samples were printed with a Stainless Steel Build Platform on a Form 3B printer with 50 μm Permanent Crown Resin settings. The printed samples were post-processed as recommended in the Instructions for Use. Screen reader support enabled

Post-Processing

Form Wash Settings

Duration

3 min in IPA

Notes

To ensure that finished parts are biocompatible, follow all part washing notes in the Instructions for Use. Maintain separate wash buckets for biocompatible materials. Do not leave Permanent Crown Resin in IPA for longer than 3 minutes total, as excessive solvent exposure affects the quality of the final part. Use an IPA-filled squeeze bottle to remove any remaining resin on the printed parts and in between supports and rafts. An IPA-soaked brush may help with resin removal.

Form Cure Settings

Duration

20 + 20 min

Temperature

60 °C

Notes

Post-curing as recommended in the material-specific Instructions for Use is required to ensure optimal performance and biocompatibility of 3D printed dental appliances. This resin requires two post-curing cycles. Remove supports and sandblast between post-curing cycles.