Custom Tray Resin
Dental
SLA
Custom Impression Trays
70 MPa
2.5 GPa
3 %
Printer
Resin Tank
Build Platform
Select Printer Series and Resin Volume
| Bulk order quantity (L) | Discount % |
|---|---|
| 1 | 0% |
| 30 | 15% |
| 60 | 20% |
| 120 | 25% |
| 240 | 30% |
| 1,000 | 35% |
| 2,000 | 40% |
| 3,000 | 45% |
Custom Tray Resin prints full impression trays quickly using 200-micron layer heights, reducing labor time and enabling higher throughput.
Read our Application Guide to learn the complete workflow and best practices for making 3D printed custom impression trays on your Formlabs 3D printer.
Printer compatibility: Form 2, Form 3B, Form 3B+, Form 4B, Form 4BL
Compatible with these resin tanks: Form 2 LT Tank, Form 3 Resin Tank V2.1, Form 4 Resin Tank, Form 4L Resin Tank
Compatible with these build platforms: Form 4 Build Platform, Form 4 Flex Build Platform, Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, Form 3L Build Platform 2L, Form 4L Build Platform, Form 4L Flex Build Platform
Is certified biocompatible.
Custom Tray Resin has been added to your cart.
Why Choose Custom Tray Resin?
Custom Tray Resin is a production-ready material that enables highly accurate definitive impressions.
High Throughput
Print full impression trays quickly using 200 micron layer heights, reducing labor time.
Accurate
Provide consistent and accurate impressions for patient-matched trays with a digital workflow.
Made-to Measure
Create ideally fit definitive models for complex cases.
Biocompatibility
Provide the patient and clinician the peace of mind they deserve.
Applications
Leverage Custom Tray Resin to take highly accurate definitive impressions for crown and bridge, implant, dentures, and comprehensive cases.
Consider Custom Tray Resin for:
Material Properties*
Custom Tray Resin
Ultimate Tensile Strength
Young's Modulus
Elongation
Hardness Shore A
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type IV tensile bars printed on a Form 2 printer with 200 μm Custom Tray Resin settings, washed in a Form Wash for 10 minutes in ≥99% Isopropyl Alcohol.
