Temporary CB Resin 1 kg (0.7 L)
Dental
SLA
Multiple Shades
100 MPa
Printer
Resin Tank
Build Platform
Resin Shade
| Bulk order quantity (L) | Discount % |
|---|---|
| 1 | 0% |
| 30 | 15% |
| 60 | 20% |
| 120 | 25% |
| 240 | 30% |
| 1,000 | 35% |
| 2,000 | 40% |
| 3,000 | 45% |
Use traditional temporary cements to fix restorations produced with Temporary CB Resin. Restorations made with Temporary CB Resin may remain up to 12 months in the mouth. Digitally created restorations enable a quick, collaborative process between dentist, technician, and patient.
Read our Application Guide to learn the complete workflow and best practices for making 3D printed temporary restorations on your Formlabs 3D printer.
Printer compatibility: Form 2, Form 3B, Form 3B+
Compatible with these resin tanks: Form 2 LT Tank, Form 3 Resin Tank V2.1
Compatible with these build platforms: Form 3 Stainless Steel Build Platform
Is certified biocompatible.
Temporary CB Resin 1 kg (0.7 L) has been added to your cart.
Why Choose Temporary CB Resin?
Temporary CB Resin is a highly filled material that's validated for comfortable, aesthetic, and temporary restorations.
Aesthetic
Provide tooth-colored prosthetics, available in five shades.
Efficient
Enable a quick, collaborative process between dentist, technician and patient with digitally created restorations.
Precise Fit
Enhance patient comfort with precisely fit temporaries with excellent marginal adaptation, strength, and aesthetics.
Temporary Biocompatibility
Restorations may remain in the mouth for up to 12 months.
Applications
Temporary CB Resin is used to produce precisely fitting temporaries with a smooth surface finish, high resolution, and dimensional stability.
Consider Temporary CB Resin for:
Material Properties*
Temporary CB Resin
Density
Viscosity
Flexural Strength
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Test samples were printed with a Stainless Steel Build Platform on a Form 2 and Form 3B printer with 50 μm Temporary CB Resin settings. The printed samples were post-processed as recommended in the Instructions for Use. Data for post-cured samples were measured on 3 point bending test specimens according to EN ISO 10477 and EN ISO 4049 standards. Screen reader support enabled.
Post-Processing
