Post curing maximizes material properties for stereolithography prints, improving parts’ performance and achieving biocompatibility.
Fast Cure is our powerful and high-performance curing unit designed to cure dental parts in one to six minutes. Formlabs Dental resins have been rigorously validated and fine-tuned with Fast Cure to work safely and seamlessly in an end-to-end workflow. The touch screen makes it easy to start a cure cycle with preloaded validated settings for each Formlabs Dental resin.
Resin compatibility: Custom Tray V1, Dental LT Clear V2, Denture Base, Denture Teeth, Draft V2, Grey V4, IBT V1, Model V2, Model V3, Permanent Crown, Surgical Guide V1, Temporary CB, White V4, Biomed Amber, Biomed Black, Biomed Clear, Biomed White
- Fast Cure
Powerful and fast curing solution for dental 3D printing, validated in an end-to-end workflow to allow safe and efficient patient treatments.
Cure any dental 3D printed part in one to six minutes with Fast Cure, our high-performance curing unit. Cure dental models in one minute, crown and bridges in five minutes, occlusal guards in six minutes.
No preheating required thanks to 200 W powerful 405 nm LED lights.
Validated End to End Workflow
Leverage Fast Cure’s preset and tuned settings for Formlabs’ Dental Resins which have been rigorously validated and fine-tuned to work safely and seamlessly in an end-to-end workflow.
Create and save custom settings for resins of your choice on the 7.9” touch UI. Connect a nitrogen tank when desired through the unit inlet*. *Curing of Formlabs resins do not require nitrogen
|Fast Cure||Form Cure||Form Cure L|
|Printer Compatibility||Form 2, Form 3B/+, Form 3/+, Form 3L/BL (limited height to 6.5cm)||Form 3+, Form 3B+, Form 3, Form 3B, Form 2||Form 3L, Form 3BL, Form 3+, Form 3B+, Form 3, Form 3B, Form 2|
|Dimensions||27.5 x 31.0 x 31.0 cm |
10.8 x 11.8 x 11.8 inch
|26.2 x 26.2 x 34.0 cm|
10.3 x 10.3 x 13.4 in
Height when open: 64 cm (25.2 in)
|69.0 x 54.0 x 44.5 cm|
27.2 x 21.3 x 17.5 in
|Weight||8.2 kg |
|Turntable Diameter||"18 cm (fits up to 8 horizontal dental arches)|
|Maximum Part Height||6.5 cm (~vertical dental arch) |
|18.5 cm |
|Operating Temperature||5 - 35 °C||Suggested 18—28 °C|
Suggested 64—82 °F
|Suggested 18—28 °C|
Suggested 64—82 °F
|Maximum Cure Chamber||N/A||80 °C|
|Light Source||56 multi-directional LEDs||13 multi-directional LEDs||45 multi-directional LEDs|
|LED Power||200 W||39 W||70W|
|LED Wavelength||405 nm||405 nm||375 nm, 405nm|
|Power Requirements||100 - 200 V 5.4 A, 50/60HZ||90–240 V|
6.0 A 50/60 Hz
|100–120 V (NA), 220–240 V (EU) |
15.0 A 50/60Hz (NA), 8.0 A 50/60Hz (EU)