Form Cure
FH-CU-01
Post-curing maximizes material properties for stereolithography prints, improving parts' strength and performance. For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Form Cure precisely combines heat and 405 nm light to consistently post-cure prints.
- Form Cure
Automate Post-Curing With Form Cure
Precisely controlled temperature and light to cure 3D printed parts to optimal performance properties.
Advanced Heating
Preheat the chamber and waste no time getting parts ready for optimum post-curing.
Uniform Exposure
Provide consistent curing with a rotating turntable.
Maximize Material Properties
Leverage Form Cure's default time and temperature settings unique to each material for optimum performance.
Rapid, High-Intensity Curing
Bring temperatures up to 80°C while 13 multi-directional LEDs emit the optimal wavelength of light for fast, effective curing.
Unlock Peak Performance
Form Cure is finely tuned to bring parts to their maximum mechanical properties.
80
An advanced heating system precisely controls curing temperatures up to 80 °C.
405
13 multi-directional LEDs emit the optimal wavelength of light for curing Formlabs materials.
1
A rotating turntable provides uniform exposure during post-curing.
Form 4 Workflow in Minutes
Form Cure is a part of a 3D printing ecosystem that’s easy to learn and use and requires little intervention or maintenance. Watch the video to learn the basics of how to use Form 4, from the software and materials to printing and post-processing.
Tech Specs
Form Cure | Form Cure L | |
---|---|---|
Printer Compatibility | Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2 | Form 3L, Form 3BL, Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2 |
Dimensions | 26.2 x 26.2 x 34.0 cm 10.3 x 10.3 x 13.4 in Height when open: 64 cm (25.2 in) | 69.0 x 54.0 x 44.5 cm 27.2 x 21.3 x 17.5 in |
Weight | 5.6 kg 12.4 lbs | 24kg 53 lb |
Turntable Diameter | 19.3 cm 7.6 in | 39.5 cm 15.6 in |
Maximum Part Height | 18.5 cm 7.28 in | 32 cm 12.6 in |
Operating Temperature | Suggested 18—28 °C Suggested 64—82 °F | Suggested 18—28 °C Suggested 64—82 °F |
Maximum Cure Chamber | 80 °C 176 °F | 80 °C 176 °F |
Light Source | 13 multi-directional LEDs | 45 multi-directional LEDs |
LED Power | 39 W | 70W |
LED Radiant | 9.1 W | 36W |
LED Wavelength | 405 nm | 375 nm, 405nm |
Power Requirements | 90–240 V 6.0 A 50/60 Hz 144 W | Input (NA) 100 - 120 VAC, 50-60Hz, 15A Input (EU) 220 - 240 VAC, 50-60Hz, 8A |