- Bio Compatibility
- Skin Contact, Mucosal Membrane Contact
- Print Technology
- SLA
- Compatible Printer
- Form 4B, Form 4BL, Form 3B, Form 3BL
- Colors
- Blue
- Applications
- Custom Impression Trays
- Ultimate Tensile Strength
- 70.0 MPa
- Elongation at Break
- 3.0 %
- Flexural Strength
- 100.0 MPa
- Shore Hardness
- 80.0 D
- Flexural Modulus
- 2600.0 MPa
- Tensile Modulus
- 2500.0 MPa
Custom Tray Resin is a fast-printing biocompatible material used to directly print custom impression trays for implants, dentures, crowns and bridges, and other comprehensive cases. Digitally manufactured impression trays provide consistent, accurate impressions for high-quality dentistry.
Custom Tray Resin prints full impression trays quickly using 200-micron layer heights, reducing labor time and enabling higher throughput.
Read our application guide to learn the complete workflow and best practices for making 3D printed custom impression trays on your Formlabs 3D printer.
Regional Availability
Product availability is limited to certain regions. See regional availability.
- Bio Compatibility
- Skin Contact, Mucosal Membrane Contact
- Print Technology
- SLA
- Compatible Printer
- Form 4B, Form 4BL, Form 3B, Form 3BL
- Colors
- Blue
- Applications
- Custom Impression Trays
- Ultimate Tensile Strength
- 70.0 MPa
- Elongation at Break
- 3.0 %
- Flexural Strength
- 100.0 MPa
- Shore Hardness
- 80.0 D
- Flexural Modulus
- 2600.0 MPa
- Tensile Modulus
- 2500.0 MPa
Select Printer Series and Resin Volume
Bulk Order Discount
- 15%
- 30 L
- 20%
- 60 L
- 25%
- 120 L
- 30%
- 240 L
- 35%
- 1,000 L
- 40%
- 2,000 L
- 45%
- 3,000 L
Accessories
Form 4 Resin Tank
€143.99incl. 21% BTW
Form 4 Mixer
€60.50incl. 21% BTW
Form 4L Resin Tank
€349.69incl. 21% BTW
Form 4L Mixer
€119.79incl. 21% BTW
Form 3 Resin Tank V2.1
€163.35incl. 21% BTW
Form 3L Resin Tank V3
€332.75incl. 21% BTW
Compatibility
- Compatible Tank
- Form 2 LT Tank, Form 3 Resin Tank V2.1, Form 3L Resin Tank V3, Form 4 Resin Tank, Form 4L Resin Tank
- Compatible Build Platform
- Form 4 Build Platform, Form 4 Flex Build Platform, Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, Form 3L Build Platform 2L, Form 4L Build Platform, Form 4L Flex Build Platform
Custom Tray Resin—
from €301.29incl. 21% BTW
Why Choose Custom Tray Resin?
Custom Tray Resin is a production-ready material that enables highly accurate definitive impressions.
High Throughput
Print full impression trays quickly using 100 micron layer heights, reducing labor time.
Accurate
Provide consistent and accurate impressions for patient-matched trays with a digital workflow.
Made-to Measure
Create ideally fit definitive models for complex cases.
Biocompatibility
Provide the patient and clinician the peace of mind they deserve.
Applications
Leverage Custom Tray Resin to take highly accurate definitive impressions for crown and bridge, implant, dentures, and comprehensive cases.
Manufactured in an ISO 13485-Certified Facility
Formlabs manufactures our Biomed and Medical Device Resins at our FDA-registered facility in Ohio. These materials are designed and manufactured within our robust Quality Management System that is ISO 13485 and EU MDR certified. A dedicated team of operators and quality assurance professionals makes the resins inside a certified ISO Class 8 clean room. All of our Medical Device Resins are appropriately registered with the FDA and CE marked according to the EU MDR.
Custom Tray Resin
| Parameter | Value |
|---|---|
|
Ultimate Tensile Strength |
> 70 MPa |
|
Young's Modulus |
> 2500 MPa |
| Elongation |
> 3% |
|
Shore Hardness |
> 80 D |
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type IV tensile bars printed on a Form 2 printer with 200 μm Custom Tray Resin settings, washed in a Form Wash for 10 minutes in ≥99% Isopropyl Alcohol.
Washing
Custom Tray Resin may be washed using either a Formlabs-validated wash unit (1) or an ultrasonic wash unit (2).
The foundational step in any SLA post-processing workflow is to remove excess resin on the surface of the parts through an alcohol wash. Please refer to the material's manufacturing guide/IFU for washing instructions.
SETTINGS
Curing
For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Please follow the material’s manufacturing guide/IFU for proper post-processing.
SETTINGS
FAQ
Custom Tray Resin is a fast-printing, biocompatible SLA material designed for directly 3D printing custom impression trays. It is used for highly accurate definitive impressions across a range of dental cases, including crown and bridge, implant, dentures, and comprehensive restorations. The digital workflow enables patient-matched trays that provide consistent, accurate impressions.
Custom Tray Resin supports impression-taking for crown and bridge, implant, dentures, and comprehensive cases. Its made-to-measure fit makes it well suited for complex clinical situations that require highly accurate definitive impressions.
Yes. Custom Tray Resin is rated for skin contact and mucosal membrane contact. It is manufactured at Formlabs' FDA-registered facility in Ohio within an ISO 13485 and EU MDR certified Quality Management System, inside a certified ISO Class 8 clean room. The material is appropriately registered with the FDA and CE marked according to the EU MDR.
Custom Tray Resin is manufactured at Formlabs' facility in Ohio. Production takes place within a robust Quality Management System that is ISO 13485 and EU MDR certified. A dedicated team of operators and quality assurance professionals produces the resin inside a certified ISO Class 8 clean room.
Custom Tray Resin offers an ultimate tensile strength greater than 70 MPa, a Young's modulus greater than 2500 MPa, elongation greater than 3%, and a Shore hardness greater than 80 D. Note that material properties may vary based on part geometry, print orientation, print settings, and temperature. You can download the full Custom Tray Resin Technical Data Sheet for complete specifications.
Custom Tray Resin supports 200-micron layer heights, which enables fast print times and high-throughput production of full impression trays while reducing labor time compared to traditional manual methods.
Custom Tray Resin is compatible with the Form 4B, Form 4BL, Form 3B, and Form 2. Compatible tanks include the Form 4 Resin Tank, Form 4L Resin Tank, Form 2 LT Tank, and Form 3 Resin Tank V2.1. Availability varies by region; check the regional availability page for details.
Yes. Two post-processing steps are required. First, parts must be washed to remove excess resin from the surface using an alcohol wash. Second, post-curing is necessary for biocompatible materials to achieve the safety standards set by regulatory agencies. Detailed settings for both steps are provided in the Manufacturing Guide and the Instructions for Use.
Formlabs provides a dedicated application guide for 3D printing custom trays that covers the complete workflow and best practices from design through post-processing. PreForm is Formlabs' free print preparation software used to prepare files before printing.
Yes. Formlabs offers a Custom Tray Resin sample part so you can evaluate the material before committing to a purchase. You can request a sample directly through the Formlabs website.
