Why Choose Denture Base Resin V2?
Denture Base Resin V2 enables dental professionals to 3D print durable, high-impact denture bases with lifelike aesthetics using a streamlined and validated process.
Long-Term Performance
Deliver dentures with the toughness to stand up to everyday wear and accidental drops — along with the compatibility to be relined with a range of hard and soft materials and repaired using standard repair methods — giving dentists and lab technicians the confidence to guarantee their work for years of patient wear.
Lifelike, Adaptive Aesthetics
Provide natural-looking gingiva in three shades — Original, Light, and Dark Pink — and optimal translucency that blends seamlessly with the patient's tissue.
Streamlined, Validated Process
Reach the final denture in fewer steps without additional equipment — a 10-minute IPA wash, 20-minute post-cure, and no extra solvents — with the ease of an auto-dispense cartridge and the fully validated Formlabs ecosystem.
Open, Flexible Workflow
Pair with Formlabs Premium Teeth Resin and streamline denture assembly using the Denture Base Resin V2 as a bonding agent — or stay flexible with full compatibility for milled, carded, or third-party 3D printed teeth and bonding materials.
Applications
Denture Base Resin V2 is expanding access to durable, lifelike digital dentures with a streamlined, validated, and cost-effective manufacturing solution.
Final Dentures
Try-in Dentures
Material Properties*
| Parameter |
Value |
|---|---|
|
Flexural Strength |
67 MPa |
|
Flexural Modulus |
2200 MPa |
| Maximum Stress Intensity Factor | 2.4 MPa.m1/2 |
| Work of Fracture | 1000 J/m2 |
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data for post-cured samples were measured on Type I tensile bars printed on a Form 4B printer with 100 µm Denture Base Resin V2 settings, washed in a Form Wash for 10 minutes in ≥99% Isopropyl Alcohol, and post-cured at 80 °C for 30 minutes in a Form Cure L V1. Testing was performed at NAMSA World Headquarters, OH, USA.
Post-Processing
Washing
The foundational step in any SLA post-processing workflow is to remove excess resin on the surface of the parts through an alcohol wash. Please refer to the material's manufacturing guide/IFU for washing instructions.
Curing
For biocompatible materials, post-curing is necessary to achieve the safety standards determined by regulatory agencies. Please follow the material’s manufacturing guide/IFU for proper post-processing.
