Applications
Soft Tissue Starter Pack empowers dental laboratories to print gingiva masks for implant models and other soft tissue models on a Formlabs printer.
Minimize chairside adjustment time
Consistently check implant prosthetics
Material Properties*
Soft Tissue Starter Pack (Flexible 80A Resin)
| Parameter | Value |
|---|---|
|
Ultimate Tensile Strength |
8.9 MPa |
|
Elongation |
120% |
|
Compression Set (23 °C for 22 hours) |
3% |
|
Shore Hardness |
80A |
|
Bayshore Resilience |
28% |
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed using Form 3, 100 μm, Flexible 80A settings, washed in Form Wash for 10 minutes and post-cured with Form Cure at 60 °C for 10 minutes.
Washing
The foundational step in any SLA post-processing workflow is to remove any excess resin on the surface of the parts through an alcohol or ether wash.
SETTINGS
Curing
Follow the recommended curing settings for the resin.
SETTINGS
Form Cure V1 | Form Cure V2 | Form Cure L V1 | Form Cure L V2