- Print Technology
- SLA
- Bio Compatibility
- Skin Contact, Mucosal Membrane Contact
- Compatible Printer
- Form 4B, Form 4BL, Form 3B, Form 3BL
- Colors
- Translucent
- Ultimate Tensile Strength
- 7.2 MPa
- Stress at 100% Elongation
- 4.5 MPa
- Elongation at Break
- 135.0 %
- Tear Strength
- 22.0 kN/m
- Shore Hardness
- 80.0 A
- Compression Set 70°C for 22 hours
- 5.3 %
BioMed Flex 80A Resin is a firm, flexible, and transparent material for biocompatible applications requiring durability and long-term skin (>30 days) or short-term mucosal membrane contact (<24 hours).
BioMed Flex 80A Resin is manufactured in our FDA-registered, ISO 13485-certified facility.
- Print Technology
- SLA
- Bio Compatibility
- Skin Contact, Mucosal Membrane Contact
- Compatible Printer
- Form 4B, Form 4BL, Form 3B, Form 3BL
- Colors
- Translucent
- Ultimate Tensile Strength
- 7.2 MPa
- Stress at 100% Elongation
- 4.5 MPa
- Elongation at Break
- 135.0 %
- Tear Strength
- 22.0 kN/m
- Shore Hardness
- 80.0 A
- Compression Set 70°C for 22 hours
- 5.3 %
Select Printer Series and Resin Volume
Bulk Order Discount
- 15%
- 30 L
- 20%
- 60 L
- 25%
- 120 L
- 30%
- 240 L
- 35%
- 1,000 L
- 40%
- 2,000 L
- 45%
- 3,000 L
BioMed Flex 80A Resin—
Why Choose BioMed Flex 80A Resin?
Achieve new design possibilities and efficiencies using 3D printing and BioMed Flex 80A Resin, from producing flexible biocompatible medical devices to anatomical models requiring biocompatibility.
Flexible
Produce flexible medical devices or firm tissue models requiring short-term mucosal membrane contact that can optimize mass personalization applications versus using cumbersome molds.
Transparent
Produce complex transparent firm tissue models and bring them directly into the operating room (O.R.) as a reference for complex medical procedures (eg. sizing models, cartilage models, or disease organs.)
Medical-Grade Material, Biocompatible Parts
Leverage a material manufactured within our Quality Management Systems, with strict adherence to ISO 13485. Instill confidence that this material is suitable for biocompatible applications with long-term skin (>30 days), short-term mucosal membrane contact (<24 hours), and USP Class VI certifications.
Applications*
Directly 3D print flexible parts requiring biocompatibility with BioMed Flex 80A Resin. Reduce workflow times by eliminating molding to directly produce flexible, patient-specific medical devices or firm tissue medical models that surgeons can reference in the O.R.
Flexible biocompatible medical devices and components, and firm tissue models to assist in surgeries
Medical devices requiring short-term mucosal membrane contact
Manufactured in an ISO 13485-Certified Facility
Formlabs manufactures our Biomed and Medical Device Resins at our FDA-registered facility in Ohio. These materials are designed and manufactured within our robust Quality Management System that is ISO 13485 and EU MDR certified. A dedicated team of operators and quality assurance professionals makes the resins inside a certified ISO Class 8 clean room. All of our Medical Device Resins are appropriately registered with the FDA and CE marked according to the EU MDR.
| Parameter |
Value |
|---|---|
|
Ultimate Tensile Strength |
7.2 MPa |
|
Stress at 50% Elongation |
2.6 MPa |
|
Stress at 100% Elongation |
4.5 MPa |
|
Elongation |
135% |
|
Tear Strength |
22 kN/m |
|
Shore Hardness |
80 A |
*Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used. Data were measured on post-cured samples printed on a Form 3B/+ with 100µm BioMed Flex 80A Resin settings, washed in a Form Wash for 20 minutes in 99% Isopropyl Alcohol. BioMed Flex 80A Resin was tested at NAMSA World Headquarters, OH, USA.