- Print Technology
- SLA
- Compatible Printer
- Form 3B
Soft Tissue Starter Pack enables you to create your own Soft Tissue Resin in customizable dark, medium, and light pink shades to 3D print flexible gingiva masks for use in combination with rigid dental models to confidently check implant prosthetics by adding removable soft tissue components to your model production.
Magenta Color Pigment, Yellow Color Pigment, and White Color Pigment can also be purchased separately.
Read our application guide to learn the complete digital workflow and best practices for making 3D printed gingiva masks on your Formlabs 3D printer.
- Print Technology
- SLA
- Compatible Printer
- Form 3B
Bulk Order Discount
- 15%
- 30 L
- 20%
- 60 L
- 25%
- 120 L
- 30%
- 240 L
- 35%
- 1,000 L
- 40%
- 2,000 L
- 45%
- 3,000 L
Accessories
Form 3 Resin Tank V2.1
$149
Form 3L Resin Tank V3
$299
Compatibility
- Compatible Tank
- Form 2 LT Tank, Form 3 Resin Tank V2.1
- Compatible Build Platform
- Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, Form 3L Build Platform 2L
Soft Tissue Starter Pack (Form 3)SKU : PKG-ST-FMYW
$285
Applications
Soft Tissue Starter Pack empowers dental laboratories to print gingiva masks for implant models and other soft tissue models on a Formlabs printer.
Minimize chairside adjustment time
Consistently check implant prosthetics
Material Properties*
Soft Tissue Starter Pack (Flexible 80A Resin)
| Parameter | Value |
|---|---|
|
Ultimate Tensile Strength |
8.9 MPa |
|
Elongation |
120% |
|
Compression Set (23 °C for 22 hours) |
3% |
|
Shore Hardness |
80A |
|
Bayshore Resilience |
28% |
* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed using Form 3, 100 μm, Flexible 80A settings, washed in Form Wash for 10 minutes and post-cured with Form Cure at 60 °C for 10 minutes.
Washing
The foundational step in any SLA post-processing workflow is to remove any excess resin on the surface of the parts through an alcohol or ether wash.
SETTINGS
Curing
Follow the recommended curing settings for the resin.
SETTINGS
Form Cure V1 | Form Cure V2 | Form Cure L V1 | Form Cure L V2
FAQ
The Soft Tissue Starter Pack enables dental laboratories to create custom-colored, flexible gingiva masks for use in combination with rigid dental models. These soft tissue components let you confidently check implant prosthetics by adding removable soft tissue to your model production, helping to minimize chairside adjustment time and consistently verify implant prosthetics.
No. The Soft Tissue Starter Pack is intended strictly for extra-oral use on dental models. It must not be used inside a patient's mouth.
Formlabs provides a dedicated application guide covering the complete digital workflow, mixing instructions, and best practices. You can access it at the implant models guide on Formlabs Dental.
The pack includes a Flexible 80A Resin base along with three color pigments: Magenta, Yellow, and White. These pigments are mixed into the resin base to achieve your desired gingiva shade.
By mixing the included pigments into the Flexible 80A Resin base, you can produce dark, medium, and light pink shades to match a variety of patient tissue tones.
Yes. The Magenta Color Pigment, Yellow Color Pigment, and White Color Pigment are each available for individual purchase.
The Soft Tissue Starter Pack (Form 3) is compatible with the Form 3B, Form 3BL, and Form 2 printers.
Compatible tanks include the Form 2 LT Tank and the Form 3 Resin Tank V2.1. Compatible build platforms include the Form 3 Build Platform, Form 3 Build Platform 2, Form 3 Stainless Steel Build Platform, Form 3L Build Platform, and Form 3L Build Platform 2L.
When printed at 100 μm using Flexible 80A settings, the cured material offers an ultimate tensile strength of 8.9 MPa, 120% elongation, a Shore Hardness of 80A, a compression set of 3% at 23 °C for 22 hours, and a Bayshore Resilience of 28%. Note that properties may vary based on part geometry, print orientation, print settings, and temperature. You can download the full Soft Tissue Technical Data Sheet for complete details.